I have owned two 1991 Camaros Z-28's (one white, one red) in the past five years.  Most parts for sale are from my current Camaro (see small picture above).

All pictures were taken by Casey Lewis on March 14, 2006.  These parts are all for sale so make me an offer. 

If you are interested in any of the parts, or have any questions please email me at:
cjlewis@bloomu.edu
or call me at:
610-703-5320
or instant message me at:
Clouiescalade24 on AIM.

Also, I have many more miscellaneous parts than what I have listed.  Please contact me and if you need something.  THANK YOU.

Parts for Sale Photos:
Please Click each Thumbnail for a larger view.
(PLEASE BE PATIENT - PAGE MAY TAKE A WHILE TO LOAD ESPECIALLY IF YOU ARE USING A 56K MODEM.  THANK YOU)

1991 stock steel Camaro hood. Hood louvers have been removed but can be put back on if interested.  Will need to be cleaned, prepped, and painted for your application.

Hood louvers off 1991 Camaro hood (above) Painted red with black inserts. All studs in great shape. Need to be sanded and painted to match your car.

ASCD SS style hood for third generation Camaro. Hood is functional and includes black grill insert. Never used or installed on any car. Small corner of hood has been broken off (see picture). Other than that, hood simply needs to be fitted and painted. Part number S-650 as seen here:
American Sports Car Designs SS Style Hood.
This is a new aftermarket fiberglass Camaro 82-92 SS Hood. The hood is functional if you purchase a new air intake/filter setup.  I personally use a TPI filter that mount directly to the throttle body - $30 from Jegs.  Please note all aftermarket hoods are designed and molded to fit cars that have not endured damage at any point.  However these hoods can be adjusted along with other body panels to  fit correctly - you may need to adjust fenders or front bumpers to install properly.  Hood will need to be prepped and painted to mach your application.

Rear window louvers off 91 Camaro with opening for rear interior brake light (Do not know if louvers will work with Camaro’s that have the exterior upper brake light). Great shape, painted red to match car my car.  Louvers will need to be painted to match your application.

K&N GM TPI Throttle Body Chrome Cone Air Filter
599-RC-5050. 1000 cfm air filter. Never used. Still in box. For more details visit:
TPI Throttle Body Cone Filter.

Stock rear end cover off 91 Camaro. Great shape. No rust of dings.

2 catalytic converters off 91 Camaro. Cats were sawed off with a sawzall so some prep work will need to be done to fit to your car. Both will need to be cut properly and then welded in place. Pictures show damage and extra piping that remains welded to cats.

TPI Plenum extension. Rubbing where a hose was touching has removed a small amount of paint (see pic).

0-300 Vacuum pressure gauge. Was included with my 700R4 Transmission when I purchased it, but my mechanic/installer already had a gauge and did not need one. Gauge has never been used.

TPI Throttle body off 1991 Camaro. Throttle body does not come with top or bottom plate (where coolant passes through). I used the old top plate on my new BBK throttle body. I am willing to ship BBK top plate (as seen in picture) with throttle body. However, BBK plate is slightly larger than stock and does not fit properly (as seen in picture). Trimming either side of the plate about an 1/8 of an inch will remedy problem. OR, Thunder Racing has many top plates for sale.
(THROTTLE BODY HAS A HYPERTECH AIR FOIL INSTALLED. I AM WILLING TO REMOVE AIR FOIL AND SELL SEPARATELY)

Stock centerbolt valve covers off 91 Camaro. Valve covers have been painted silver and have a few small dings and scratches (see pics).

Rear trunk shade. Vinyl. Dark/navy blue color. Great shape - no tears or fading from sun.

Vortex Cherry Bomb Muffler and exhaust pipes/tips from 91 Camaro. Muffler is in decent shape although it has been sitting for a while and a small amount of rust flakes did fall out when I shook it. Also, about and inch of exhaust pipe coming from the front of the car is still in the muffler opening where it accepts it (see pic). I assume heating the muffler will allow you to pop it right out. As far as I can tell, the tips are Hooker Headers Classic European Style Exhaust Tips seen here:
Hooker Exhaust Tips.
Tips need polishing and there is slight damage to the underside (scrapes - see pics) on 2 our of the 4.

Hypertech Fuel Pressure gauge. Never used. Still in box. More info at:
Hypertech Fuel Pressure gauge.

Hypertech 160 degree thermostat. Never used. Still in box. More info at:
Hypertech 160 Degree Thermostat.

Transmission inline filter. Kit which allows you to put an inline filter on any transmission line. Came with Bowtie Overdrives 700R4 transmission when I purchased it.

Throttle cable off 91 TPI Camaro. I am not exactly sure, but I believe this is a cable for a B&M hammer shifter. There are no markings on it to indicate exactly where it is from but it is red and hopefully the pics will provide clear enough detail to see if it is the type you are looking for.

Fuse panel plastic cover out of 91 camaro. Protects fuse panel and wires under steering wheel.

Tube and Dipstick off 700R4 transmission from a 91 Camaro.

UPDATE: 3/28/06
Air cleaner assembly from a 91 Camaro.  Plastic piece which holds air filters has been modified by removing air baffles under filters which hindered the air from entering - very common and easy mod (see pics). Also, rubber tube that connects throttle body to upper portion of air assembly.  Piece has stickers on top and would probably require a bit of work to cleanly remove (see pics).  Also, 2 thoroughly washed K&N air filters.  Filters have less than 3,000 miles and have been washed using the K&N Recharger kit.  They were cleaned several times with hot water and the K&N supplied cleaning product. I NEVER used compressed air.  Filters will be thoroughly oiled before shipped unless you would prefer to oil them yourself.

Stereo:
All stereo equipment was removed from the car when I bought it. I had no need for it and am happy with just a CD player and regular speakers.
Kicker 15 inch Free Air F15a 4 Ohm subs, Motorola tweeters, and surrounding box wrapped in black. Box fit into 91 Camaro. One of the clips holding the sub cover has been broken but can easily be replaced. Covers are steel and not plastic. Box is wood, wrapped in black carpet, and was designed by Sabre Sound Inc. of Austin Texas.
Serial number: 022246.
Model number: CF-200

Alpine “V12 DC Straight” 4/3/2 Channel power amplifier.
Model number: MRV-F400S
Serial number: V60113419

Blaupunkt BPA 2120B High performance amplifier.

Sorry I can’t tell you more about the amps but as I stated, I don’t know much about car audio. However, I am happy to answer any questions.


Also, I have many more parts off of a 1991 Camaro including:
Heat shield (Located between floor board and catalytic converters) - painted in ultra high temp red paint.
2 700R4 stock transmission pans
Screw on antenna
Stock ignition coil
Stock distributor cap
Spare tire and scissors jack

Please contact me and make me offers through e-mail or telephone.  I am located near Allentown Pennsylvania if you want to pick up any parts.  Shipping for the larger parts (hoods/rear window louvers) will obviously be fairly pricey (60-100+).  Contact me and I can get a quote.  All items are sold as is so please ask questions so there are no miscommunications.  Parts will be shipped promptly after payments have been received.  Contact information can be found on the right column of the page.